Ads Security FA700KP-ADS Guide d'installation télécharger pdf (Page 7)

– 7 –

✱

164 PAGER 2 CHARACTERS

| | | | | | | | | | | | | | |

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

165 PAGER 2 REPORT OPTIONS

[0,0,0]

Part. 1 Part. 2 common

See field *162 for reporting options. Select for each

partition (use zone list 10 if using options 12 or 13).

✱

Enter up to 20 digits. 0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

168 PAGER 3 REPORT OPTIONS

0,0,0]

Part. 1 Part. 2 common

See field *162 for reporting options. Select for each

partition (use zone list 11 if using options 12 or 13).

✱

Enter up to 20 digits. 0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

170 PAGER 4 CHARACTERS

| | | | | | | | | | | | | | |

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

171 PAGER 4 REPORT OPTIONS

[0,0,0]

Part. 1 Part. 2 common

See field *162 for reporting options. Select for each

partition (use zone list 12 if using options 12 or 13).

✱

172 PAGER DELAY OPTION FOR ALARMS

[3]

0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes

This delay is for ALL pagers in the system.

MISCELLANEOUS SYSTEM FIELDS (*174-*181)

✱

174 CLEAN ME REPORTING OPTIONS

(for ESL smoke detectors)

[0]

0 = disable; 1 = Clean Me signal reports;

Note:

If Clean Me is enabled, you must enter “3” in

field ✱56 programming for zone 1 response time.

✱

177 DEVICE DURATION 1, 2

(used in *80 Menu mode-Device Actions 5/6)

[0] [0]

1 2

0 = 15 seconds 6 = 2-1/2 min #+11 = 7 min

1 = 30 seconds 7 = 3 min #+12 = 8 min

2 = 45 seconds 8 = 4 min #+13 = 10 min

3 = 60 seconds 9 = 5 min #+14 = 12 min

4 = 90 seconds #+10 = 6 min #+15 = 15 min

5 = 2 minutes

✱

181 50/60 HERTZ AC OPERATION

[0]

0 = 60 Hz; 1 = 50 Hz

CONFIGURABLE ZONE TYPE OPTIONS (*182-*185)

✱

182 CONFIGURABLE ZONE TYPE 90

1 2 3 4 5 6 7 8 9 10

Enter the appropriate value for each entry, 1-10, based on the charts provided on the

next page. Each entry is the sum of the values of its selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

✱

183 ZONE TYPE 90 REPORT CODES

IMPORTANT: Use existing Contact ID®

codes, if appropriate, or define unique codes

in CID code range 750-789. See important

note in installation instructions.

90 ALARM ID: XXX

TROUBLE ID: XXX

Enter the desired 3-digit Contact ID® report codes for

alarms and troubles occurring on zones assigned to

this zone type. Enter the codes sequentially (all 6

digits). When entering digits, [#] moves cursor back, [∗]

moves forward. Press [∗] when done to continue.

✱

184 CONFIGURABLE ZONE TYPE 91

1 2 3 4 5 6 7 8 9 10

Enter the appropriate value for each entry, 1-10, based on the charts provided on the

next page. Each entry is the sum of the values of its selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

✱

185 ZONE TYPE 91 REPORT CODES

IMPORTANT: Use existing Contact ID®

codes, if appropriate, or define unique codes

in CID code range 750-789. See important

note in installation instructions.

91 ALARM ID: XXX

TROUBLE ID: XXX

Enter the desired 3-digit Contact ID® report codes for

alarms and troubles occurring on zones assigned to

this zone type. Enter the codes sequentially (all 6

digits). When entering digits, [#] moves cursor back, [∗]

moves forward. Press [∗] when done to continue.

TOUCH SCREEN DEVICE (AUI) ENABLE

✱

189 AUI DEVICE 1 and 2 ENABLE

(for Touch Screen style keypads)

NOTE:

System supports up to two touch

screen style keypads (e.g. Symphony

Advanced User Interface, and FA700KP

Touch Screen keypad).

Use of AUI does not affect the number of

standard keypads supported.

[1] [1]

AUI 1 AUI 2

AUI 1: Must set AUI address to 1

AUI 2: Must set AUI address to 2

(see Inst. Instr. for details)

FA168CPS: Enter each touch screen (AUI) device’s

home partition -- 0 = disabled; 1 = partition 1;

2 = partition 2; 3 = partition 3 (common)

FA148CP: 0 = disabled; 1 = enabled

AUI Compatibility Note: To ensure proper AUI

device operation, connect only to controls having

microprocessor version 3.0 or higher, and use AUI

devices with the following rev levels: FA700KP

series use version 1.0.9 or higher; 8132/8142

(Symphony) series use version 1.1.175 or higher.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Ads Security FA700KP-ADS Guide d'installation Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Ads Security FA700KP-ADS