Ads Security FA700KP-ADS Guide d'installation télécharger pdf (Page 6)

– 6 –

✱

90 EVENT LOG ENABLES

[3]

NOTE

System messages are

logged when any non-zero

selection is made.

0 = None; 1 = Alarm/Alarm Restore

2 = Trouble/Trouble Restore;

4 = Bypass/Bypass Restore;

8 = Open/Close.

Example:

To select “Alarm/Alarm Restore”, and

“Open/Close”, enter 9 (1 + 8); To select all, enter #15.

✱

91 OPTION SELECTION

[8,0]

Options SIA-Comp Controls

Call Wait Disable

Options: 0 = None

2 = Sounder Delay (delays sounding by 15 seconds)

UL: if used, entry delay (*35) must be 30 sec. max.

4 = AAV UL: must use ADEMCO UVCM module

8 = Exit Delay Restart/Reset UL: must be disabled

#+12 = AAV and Exit Delay Restart/Reset

SIA Guidelines: Exit Delay should be enabled.

SIA-Compliant Controls: Options: Same as listed above.

Call Waiting Disable: 0 = call waiting not used

1 = call waiting disable digits (*70) entered in field *40;

(when selected, the system dials the entry in field *40

only on alternate dial attempts; this allows proper

dialing in the event call waiting service is later

canceled by the user).

✱

92 PHONE LINE MONITOR ENABLE

UL: see Inst. Instructions for requirements

[0,0]

1 2

NOTE: Output Device must

either be programmed to be

STOPPED in field ✱80 or

STOPPED by Code + # + 8 +

output number.

Entry 1:: 0 = disabled, 1-15 = 1 min - 15 min

(#+10 = 10 min; #+11 = 11 min; #+12 = 12 min;

#+13 = 13 min; #+14 = 14 min; #+15 = 15 min)

Entry 2:

0 = Keypad display when line is faulted

1 = Keypad display plus keypad trouble sound

2 = Same as “1”, plus programmed output device

STARTS. If either partition is armed, external

sounder activates also.

✱

93 No. OF REPORTS IN ARMED PERIOD

PER ZONE (Swinger Suppression)

[1,0]

Restrict SIA-Comp Controls

Report Pairs Unlimited

Reports Enable

Restrict Report Pairs:

0 = Unlimited Reports; 1 = 1 report; 2 = 2 reports

SIA Guidelines: Must be set for option 1 or 2.

SIA-Compliant Controls:

Restrict Report Pairs: 1 = 1 report pair; 2 = 2 report pairs

Unlimited Reports Enable:

0 = restrict reports to the setting in entry 1

1 = unlimited reports for zones listed in zone list 7; (use

zone list 7 to enter those zones that require unlimited

reporting; these zones ignore the setting in entry 1)

DOWNLOAD INFORMATION (

✱

94,

✱

95)

✱

Enter up to 20 digits, 0–9; #+11 for '

✱

'; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused

spaces. If fewer than 20 digits, exit field by pressing

✱

. To clear entries from field, press

✱

UL: downloading may be performed only if a technician is at the site.

✱

95 RING COUNT FOR DOWNLOADING

[15]

NOTE: Do not enter “0” if using

FA4285/FA4286 Phone

Module.

0 = Disable Station Initiated Download;

1–14 = number of rings (1–9, # +10 =10, # +11 =11,

# +12 =12, # +13 =13, # +14 =14);

15 = answering machine defeat (# +15 =15).

∗

96, ∗

∗∗

∗97 INITIALIZE/RESET DEFAULTS

These are commands, not data fields. See page 2.

∗

98, *99 EXIT COMMANDS

These are commands, not data fields. See page 2.

PAGER OPTIONS (✱160- ✱172)

✱

Enter up to 20 digits. 0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

161 PAGER 1 CHARACTERS

| | | | | | | | | | | | | | |

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

✱

162 PAGER 1 REPORT OPTIONS

Part. 1 Part. 2 common

[0,0,0]

For each partition, select from the following options:

0 = no reports sent

1 = Open/closes all users

4 = All alarms and troubles

5 = All alarms / troubles, and open/closes for all users

12 = Alarms / troubles for zones entered in zone list 9

13 = Alarms / troubles for zones entered in zone list 9,

and open/closes for all users

✱

163 PAGER 2 PHONE No.

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. 0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Ads Security FA700KP-ADS Guide d'installation Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Ads Security FA700KP-ADS