Ads Security FA700KP-ADS Guide d'installation télécharger pdf (Page 9)

2–1

SECTION 2

Mounting and Wiring

••••••••••••••••••••••••••••••••

In This Section

♦

Mounting the FA700KP-ADS

♦

Wiring the FA700KP-ADS

••••••••••••••••••••••••••••••••

Mounting the FA700KP-ADS

The FA700KP-ADS should be mounted using the following criteria:

• The FA700KP-ADS must be mounted indoors, and

• should be mounted at eye level for easy viewing by the user.

To mount the FA700KP-ADS, see Figure 1 and complete the following

steps:

1. Detach the case back by pushing up into the two tabs located at

the bottom of the FA700KP-ADS with the blade of a screwdriver

while pulling the case back and case front apart.

2. Locate the case back over the mounting surface such that the

opening in the case back is aligned with the wire/cable access

opening (in the mounting surface) while passing the wires/cable

through the opening in the case back.

3. Secure the case back to the mounting surface using four screws

(supplied).

Prior to attaching the case front to the case back, be sure to wire the

FA700KP-ADS as described in the "

Wiring the FA700KP-ADS

paragraph in this section.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Pas de commentaire

Ads Security FA700KP-ADS Guide d'installation Page 9