Ads Security FA700KP-ADS Guide d'installation télécharger pdf (Page 28)

FA700KP-ADS Installation and Setup Guide

4–14

SCREEN ACTION

When the Update is complete the

FA700KP-ADS goes to the "Home"

screen or "More Choices" screen

depending on whether you pressed the

"Home" or "Back" button, respectively

("More Choices" screen shown).

How to Set the Time and Date

You can set the time and date from the Set Time & Date screen.

Pressing the Time and Date bar located at the bottom of each

FA700KP-ADS screen displays the Set Time & Date screen.

When the time is set it will be stored in the FA700KP-ADS only. The

FA700KP-ADS will send the time to the control panel every hour.

This 1-hour timer starts on FA700KP-ADS power-up.

If Adjust for DST (Daylight Savings Time) is selected, the

FA700KP-ADS will adjust for Daylight Savings time. When selected,

the next time the 1-hour timer expires, the new value will be sent to

the control panel.

IMPORTANT: This means that the FA700KP-ADS setting will override

and overwrite the control panel time setting. That is, if the control panel

is set to DST and adjusts but the FA700KP-ADS is not, upon the 1-hour

timer expiration, the control panel will be updated to the current time

that is not adjusted for DST.

From the Set Time & Date screen, adjust either or both the time

and date by pressing the increase or decrease arrow buttons as

necessary until the proper month, day, year, hour, and minute are

displayed.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Pas de commentaire

Ads Security FA700KP-ADS Guide d'installation Page 28