Ads Security FA700KP-ADS Guide de l'utilisateur télécharger pdf (Page 54)

FA700KP-ADS Setup (cont'd)

How to Set the Time and Date

You can set the time and date from the Set Time & Date screen.

Pressing the Time and Date bar located at the bottom of each

FA700KP-ADS screen displays the Set Time & Date screen.

• When the time is set it will be stored in the FA700KP-ADS only.

The FA700KP-ADS will send the time to the control panel every

hour. This 1-hour timer starts on FA700KP-ADS power-up.

• If Adjust for DST (Daylight Savings Time) is selected, the

FA700KP-ADS will adjust for Daylight Savings time. When

selected, the next time the 1-hour timer expires, the new value

will be sent to the control panel.

IMPORTANT: This means that the FA700KP-ADS setting will override

and overwrite the control panel time setting. That is, if the control panel

is set to DST and adjusts but the FA700KP-ADS is not, upon the 1-hour

timer expiration, the control panel will be updated to the current time

that is not adjusted for DST.

From the Set Time & Date screen, adjust either or both the time

and date by pressing the increase or decrease arrow buttons as

necessary until the proper month, day, year, hour, and minute are

displayed.

CANCEL

BUTTON

DECREASE

BUTTON

(TYPICAL)

INCREASE

BUTTON

(TYPICAL)

6270-008-V0

Set Time & Date Screen

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Pas de commentaire

Ads Security FA700KP-ADS Guide de l'utilisateur Page 54